One of the most common causes of fire is electrical short circuit, in turn caused by capacity overload and/or inadequate cable installations. Looking at the effects of a cable fire with its associated smoke spread in unprotected buildings it is easy to understand damage scenario: 60% of fire are caused by electrical installations and equipment. 90% of people injured during fire are not killed by the fire, but are victims of toxic gases. Up to 1, 000 m³ of room air are contaminated with toxic smoke when just 1 kg of PVC cable insulation burns. 0.1 l HCI (hydrochloric acid) arises when 1kg of PVC cable insulation burns. Corrosive contamination of all room surfaces, production machinery, wares, etc. by bonding with humidity or fire water.
The fact that in many buildings a fire has not occured for decades does not prove that there is no danger.
It is only a stroke of luck, the end of which may arrive at any time.“Passive fire protection is required by law for…
Protecting people‘s life Protecting the environment Protecting Public Safety Basis of an effective fire-fighting
The fire zone areas to be protected by using following Passive Fire Protection Products like:
Fire Retardant Coating for cables and pipes Cable Bandages and Cable Tubes Bulkhead system (Fire Barriers for wall and ceiling or cable penetration seals) Fire Retardant Coating for steel and wood Fire Protection coating for Structures Fire Door
Passive Fire Protection Products, Fire Retardant Coating Compound, Passive Fire, Fire, Fire Protection System
