1Department of Chemistry, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka560056, India
2Chemistry R & D Centre, Department of Chemistry, Rajarajeswari College of Engineering, Bengaluru, Karnataka560074, India
3Department of Mechanical Engineering, Dr. Ambedkar Institute of Technology, Bengaluru, Karnataka560056, India
4Department of Chemistry, Bangalore University, Bengaluru, Karnataka560056, India
*Corresponding Author Pruthviraj R.D., Chemistry R & D Centre, Department of Chemistry, Rajarajeswari College of Engineering, Bengaluru, Karnataka560074, India E-mail: pruthvirajrd@gmail.com
Based on the application prominent choice of material is essential the development and end use. Aluminium nano composite can be used to replace the conventional aluminium alloy due to its considerable strength. Normally aluminium undergoes corrosion and the corrosion rate can be reduced by reinforcing suitable fillers in nano level. This attempt was made to study the influence of chromium addition to the corrosion behavior of AL 5082/TIB2 composites. A stir casting technique used to prepare different % at 0, 2, 4, 6% composite of nano TiB2 when it was immersed in 3.5 wt % from the Nyquist plots and equaling circuit fitting results. The charge transfer resistance values was observed to change from 10 to 3.7 30 to 9.5 19 to 2.8 for 0.3 and 6 wt % chromium content respectively after 72 hours of exposure. The increase in the charge of transferred resistance has obtained with an increasing chromium content has a clear indication of improved resistance to corrosion
Al 5082, NaCl, EIS, SEM
