International Journal of Engineering and Management Research (IJEMR)
  • Year: 2015
  • Volume: 5
  • Issue: 3

Effect of Cutting Parameters in Turning of Aluminium 2024 to Obtain Maximum MRR and Minimum Temperatue by using RSM (Under Dry Condition)

  • Author:
  • B. Pradeep Kumar1, N.V.N. Indra Kiran2, J.V. Bhanutej1
  • Total Page Count: 8
  • Page Number: 94 to 101

1 Assistant Professor, Department of Mechanical Engineering, ANITS, Visakhapatnam, Andhra Pradesh, India

2Assoc. Professor, Department of Mechanical Engineering, ANITS, Visakhapatnam, Andhra Pradesh, India

Online published on 21 November, 2017.

Abstract

The main objective of this work deals with optimization of cutting parameters on aluminium 2024 specimen in turning operation to obtain Maximum Material Removal Rate(MRR), and Minimum work piece temperature using surface response analysis under dry conditions. Now a days aluminium is widely used in automobile industry, aerospace industry etc., due to its high weight to strength ratio. In the present work Full Factorial Design is considered with three process parameters: Speed, Feed and Depth of cut. By using the mathematical model the main and interaction effect of various process parameters on MRR and Temperature are studied. The developed model helps in selection of proper machining parameters for the specific material and also helps in achieving the desired Material Removal Rate and minimum Temperature.

Keywords

Material Removal Rate, Cutting Forces, Design of Experiments, Response Surface Methodology