Indian Journal of Cryogenics

Table of Contents

• RESEARCH ARTICLE

  Development and manufacturing of large cryogenic containers for storage and transportation

  • Author: Parag P. Kulkarni
  • DOI: 10.5958/2349-2120.2018.00001.8

• Optimization of the performance of injection cooling system using genetic algorithm

  • Author: Pritam Saha, B. Nitin, Pavitra Sandilya
  • DOI: 10.5958/2349-2120.2018.00002.X

• Performance characterization of a radiation shield baffle structure of a cryocooler based cryosorption pump for INTF

  • Author: Milind Patel, Arun Kumar Chakraborty, Mainak Bandyopadhyay, Chandramouli Rotti
  • DOI: 10.5958/2349-2120.2018.00003.1

• Design development and studies on a liquid nitrogen based cryosorption pump

  • Author: K. A. Shafi, Mathew Skaria, Rijo Jacob Thomas, K. Vasudevan, H. Mohammed Faizal, P. Vishnu, Srinivasan Kasthurirengan
  • DOI: 10.5958/2349-2120.2018.00004.3

• Structural and thermal analysis of dewar supports for low boil-off long duration storage of cryogenic liquids

  • Author: B. Nitin, Pavitra Sandilya
  • DOI: 10.5958/2349-2120.2018.00005.5

• A prototype experiment on cryocooler based cryopump

  • Author: Milind Patel, Arun Kumar Chakraborty, Mainak Bandyopadhyay, Chandramouli Rotti, Deepak Parmar, Hardik Shishangiya, Himanshu Tyagi, Ratnakar Yadav, Kartik Patel, Hiren Mistry, Kaushal Pandya
  • DOI: 10.5958/2349-2120.2018.00006.7

• Design and development of an emissivity measurement set-up for use at 100 K

  • Author: K. A. Shafi, Mathew Skaria, Rijo Jacob Thomas, K. Vasudevan, C. Krishnachandran, Arun Mudya Prakhyath, Manjunath Hatti, Srinivasan Kasthurirengan, Upendra Behera, Ranjana Gangradey, Samiran Mukerjee
  • DOI: 10.5958/2349-2120.2018.00007.9

• Cryocooler based helium liquefier development-A practical usage

  • Author: Anup Choudhury, Santosh Sahu, Ramcharan Meena
  • DOI: 10.5958/2349-2120.2018.00008.0

• Development of an experimental set-up for effective thermal conductivity studies of insulations between 77K and 300K

  • Author: Skaria Mathew, K. A. Shafi, Rijo Jacob Thomas, K. Vasudevan, D. Muhammed Anshad, Srinivasan Kasthurirengan
  • DOI: 10.5958/2349-2120.2018.00009.2

• Stress analysis of cryogenic suspension system of superconducting MRI magnet cryostat

  • Author: Navneet Suman, Soumen Kar, Mukesh Kumar, Sankar Ram Thekkethi, Vijay Soni, Ram Gopal Sharma, Tripti Sekhar Datta
  • DOI: 10.5958/2349-2120.2018.00010.9

• Design and analysis of a portable free piston stirling deep freezer

  • Author: M. Harikrishnan, Biju T. Kuzhiveli
  • DOI: 10.5958/2349-2120.2018.00011.0

• Design analysis and development of a thermoacoustic engine

  • Author: V.K. Yadav, K.V. Yadav, S.K. Gupta, T.K. Nandi
  • DOI: 10.5958/2349-2120.2018.00012.2

• Numerical analysis of miniature coaxial Stirling type pulse tube cryocooler with a modified reservoir

  • Author: Derick Abraham, Biju T. Kuzhiveli
  • DOI: 10.5958/2349-2120.2018.00013.4

• Online quality factor measurement of the SRF cavity in injector cryomodule of VECC electron LINAC

  • Author: Uttam Bhunia, Vaishali Naik, R.E. Laxdal, Ma Yanyun, R. Nagimov, David Kishi, V. Zvyagintsev
  • DOI: 10.5958/2349-2120.2018.00014.6

• Fabrication of racetrack-type double pancake HTS coil for K500 extraction beam line steering magnet

  • Author: Vipendra K Khare, Ankur Agarwal, Tamal Ghosh, Uttam Bhunia, Chinmay Nandi, Anindya Roy, Jedidiah Pradhan, Malay Kanti Dey, Sajjan K. Thakur
  • DOI: 10.5958/2349-2120.2018.00015.8

• Thermal performance enhancement of liquid nitrogen distribution system of SST-1

  • Author: Rajiv Sharma, Atul Garg, Hiren Nimawat, Gaurav Purwar, V. L. Tanna
  • DOI: 10.5958/2349-2120.2018.00016.X

• Design of nitrogen cryolines for ITER

  • Author: K. Choukekar, N. Shah, H. Kapoor, M. Jadon, U. Kumar, H. Vaghela, B. Joshi, V. Gehani, H. Kanzaria, H. Vyas, R. Panjwani, S. Badgujar, D. Grillot, B. Sarkar
  • DOI: 10.5958/2349-2120.2018.00017.1

• Thermal conductivity studies of epoxy-aluminium composites (300 K-4.5 K) for the development of cryosorption pumps

  • Author: Ravi Verma, N. C. Shivaprakash, Upendra Behera, S. Kasthurirengan, G. J. Bharath, R. Gangradey
  • DOI: 10.5958/2349-2120.2018.00018.3

• Numerical investigation on the pressure drop characteristics for steady and pulse flow along a compact regenerator

  • Author: V. M. Abhiroop, R. I. Vivek, K. E. Reby Roy
  • DOI: 10.5958/2349-2120.2018.00019.5

• Analysis of the effect of liquid volume fraction of liquid helium chamber with wall heat flux for K 500 SC

  • Author: Pranab Bhattachryya, Anjan Dutta Gupta, S. Dhar, Paramita Mukherjee
  • DOI: 10.5958/2349-2120.2018.00020.1

• Numerical investigations on direct contact condensation (DCC) of oxygen vapour in a staged combustion cycle based rocket engine

  • Author: K. N. Jayachandran, Arnab Roy, Parthasarathi Ghosh
  • DOI: 10.5958/2349-2120.2018.00021.3

• Effect of bottom heating on thermal stratification and self-pressurization in a cryogenic tank

  • Author: S. B. Vishnu, T. H. Rahuldas, Biju T. Kuzhiveli
  • DOI: 10.5958/2349-2120.2018.00022.5

• Two phase helium cooling characteristics in Cable-in-Conduit Conductors

  • Author: G.K. Singh, S. Pradhan, V.L. Tanna
  • DOI: 10.5958/2349-2120.2018.00023.7

• HTS based 400 mm level sensor for liquid nitrogen

  • Author: Abhay S. Gour, Pankaj Sagar, H. Sudharshan, R. Karunanithi, S. Jacob
  • DOI: 10.5958/2349-2120.2018.00024.9

• Ethernet based instrument-device-servers & IoT to replace PLC, CAMAC, VME based Cryogenic CDAQ systems

  • Author: Joby Antony, Anup Choudhry, T.S. Datta, Tanmoy Maity
  • DOI: 10.5958/2349-2120.2018.00025.0

• Design and characterization of a low noise amplifier operating at cryogenic temperature

  • Author: Ashif Reza, A. K. Sikdar, P. Das
  • DOI: 10.5958/2349-2120.2018.00026.2

• Capacitance level sensor with integrated cold electronics

  • Author: Pankaj Sagar, Abhay S. Gour, H. Sudharshan, R. Karunanithi
  • DOI: 10.5958/2349-2120.2018.00027.4

• Quench analysis of 1.5 T superconducting MRI magnet

  • Author: Vijay Soni, Soumen Kar, Navneet Suman, Mukesh Kumar, Sankar R. Thekkethil, Rajesh Kumar, Ram Gopal Sharma, Tripti Sekhar Datta
  • DOI: 10.5958/2349-2120.2018.00028.6

• Wear properties of Polytetrafluroethylene (PTFE) at cryogenic temperature

  • Author: D. S. Nadig, George Paul, V. K. Pavan, C. V. Mahishi, H. Sudharshan, Anshuman Dubey
  • DOI: 10.5958/2349-2120.2018.00029.8

• Effect of cryogenic temperature on electrical parameters of copper coil used in SMES

  • Author: Pranoti R. Raut, M. D. Atrey, Himanshu J. Bahirat
  • DOI: 10.5958/2349-2120.2018.00030.4

• Development of a lab-scale High-Tc superconducting power cable

  • Author: T. Sudheer, V. A. S. Muralidhar Bathula, U. K. Choudhury, B. Nageshwar Rao, A. Usoskin, V. V. Rao
  • DOI: 10.5958/2349-2120.2018.00031.6

• Analysis of mechanical stress due to winding pretension in a 1.5 T superconducting MRI magnet

  • Author: Sankar Ram Thekkethil, Soumen Kar, Navneet Suman, Mukesh Kumar, Vijay Soni, Ram Gopal Sharma, Tripti Sekhar Datta
  • DOI: 10.5958/2349-2120.2018.00032.8

• EDITORIAL

  EDITORIAL

• FROM THE DESK

  Preface

  • Author: Sumit Som