Journal of Innovation in Mechanical Engineering (JIME) Guru Nanak Publications is a scholarly peer-reviewed biannually fully refereed international journal focusing on innovative concepts, original, previously unpublished research results, experimental or theoretical. Journal of Innovation in Mechanical Engineering (JIME) Guru Nanak Publications covers all areas of Aerospace, Automobile, Bio-Mechanics, Fluid Mechanics, CAE, CAD/CAM, CFD, Design and Optimization, Industrial Engineering, Manufacturing, Materials Science and Metallurgy, MEMS, Mimics, Mechatronics, Production and Production Management, Nano Technology, Rapid Prototyping, Renewable Energy Sources, Robotics, Thermal Engineering, Tribology and Surface Engineering in Mechanical Engineering. The core vision of JIME is to serve as platform for innovativeness in Mechanical Engineering.
Aims and Scope
Journal of Innovation in Mechanical Engineering (JIME) is a scholarly peer-reviewed biannually fully refereed international journal focusing on innovative concepts, original, previously unpublished research results, experimental or theoretical. Fairness and transparency of the review process are pursued by traditional and innovative means, including the possibility of reviewers of accepted papers to disclose their identity and publish a brief commentary together with the article.
It aims at publishing new ideas with state of art research results and fundamental advances in Mechanical Engineering. It also provides a platform for young researchers, experts and technocrats from the industries to share their expertise, results and research with the technical world. Journal of Innovation in Mechanical Engineering (JIME) is steered by scholars of the International repute and Indian main stream technical universities as editorial advisory board.
The main scope of Journal of Innovation in Mechanical Engineering (JIME) is to publish original research articles in the area of Mechanical Engineering including (but not limited to) Aerospace, Automobile, Thermal Engineering, Renewable Energy Sources, Bio-Mechanics, Fluid Mechanics, MEMS, Mechatronics, Robotics, CAD/CAM, CAE, CFD, Design & Optimization, Tribology, Materials Engineering & Metallurgy, Mimics, Surface Engineering, Nano Technology, Polymer science, Manufacturing, Production & Production Management, Industrial Engineering, Rapid Prototyping.
Editorial Board
Chief Editor
Dr. H. S. Saini
M. Tech., Ph.D. (CSE)
Managing Director, Guru Nanak Institutions
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: chief_editor@innovationjournals.com, 8096601222
Editors
Dr. S. Sreenatha Reddy
M. Tech., Ph.D. (Mech)
Principal, Guru Nanak Institute of Technology
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: principal.gnit@gniindia.org, 8096609821
Dr. M. Ramalinga Reddy
M. E., Ph.D. (Mech)
Director, Guru Nanak Institutions Technical Campus
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: director.gnitc@gniindia.org, 8497900081
Associate Editors
Dr. B. Vijaya Kumar
M. Tech., Ph.D. (Mech)
HOD, Mechanical Engineering
Guru Nanak Institutions Technical Campus
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: hodme.gnit@gniindia.org, 8096609836
Dr. G. Sankaranarayanan
M. E., Ph.D. (Mech)
HOD, Mechanical Engineering
Guru Nanak Institutions Technical Campus
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: hodme1.gnitc@gniindia.org, 8096609816
Dr. R. Dhanasekaran
M. E., Ph.D. (Mech)
Professor, Mechanical Engineering
Guru Nanak Institute of Technology
Ibrahimpatnam, Hyderabad, Telangana, India.
Email: dhanasekharan.megnit@gniindia.org, 9043793491
Editorial Advisory Board
Dr. M. Mohan Reddy,
Associate Professor, Curtin University, Malaysia
Email: mohan.m@curtin.edu.my
Dr. N. Arunachalam
Assistant Professor
Department of Mechanical Engineering
Indian Institute of Technology - Madras,
Email: chalam@iitm.ac.in
Dr. N. S. Reddy
Associate Professor
Gyeongsang National University, Korea
Email: nsreddy@gnu.ac.kr
Dr. T. Ramesh
Associate Professor, Mechanical,
NIT Trichy, Tamilnadu
Email: tramesh@nitt.edu
Dr. Elamaran Jayamani
Professor, Swinburne University Malaysia
Email: elammaranj@gmail.com
Dr. Y. Ravi Kumar
Associate Professor, Mechanical,
NIT, Warangal, Telangana, India
Email: yrk@nitw.ac.in
Dr. V. N. Mani
Scientist-E, C-MET,
Department of Electronics & Information Technology,
Hyderabad, India
Email: vnmanicrystal272001@gmail.com
Dr. A. Veeresh Babu
Assistant Professor, Mechanical,
NIT, Warangal, Telangana, India
Email: veereshbabu196@gmail.com
Dr. R. Gopalan
Associate Director, ARCI (DST), Chennai & Adjunct
Professor, IIT Madars, India
Email: gopy@arci.res.in
Dr. L. Siva Rama Krishna
Associate Professor, Mechanical,
Osmania University, Telangana, India
Email: lsrkou@gmail.com
Dr. GSVL Narasimham
Chief Research Scientist, Mechanical
Indian Institute of Science
Bangalore, Karnataka, India
Email: gsvln@iisc.ac.in
Dr. K. Tamil Manan
Associate Professor
IGNOU, New Delhi, India
Email: ktmannan@ignou.ac.in
Dr. N. N. Kishore
Professor, Mechanical,
Indian Institute of Technology Tirupati
Email: nnk@iittp.ac.in
Please contact subscription@indianjournals.com for Archive prices
Author Guidelines
Guidelines for Preparation of Manuscript
Areas of particular interest includes
Aerospace Engineering
Automobile Engineering
Bio-Mechanics
Fluid Mechanics
CAE/CAD/CAM
CFD
Design and Optimization
Industrial Engineering
Manufacturing Process
Materials Science and Metallurgy
MEMS, Mimics
Mechatronics
Production and Production Managements
Nano Technology
Rapid Prototyping
Renewable Energy Sources
Robotics
Thermal Engineering
Tribology
Surface Engineering
Types of Scientific Communications
Mini-Reviews: Mini-reviews should be of 2000-4000 words excluding figures, structures, photographs, schemes, tables etc.
Full-Length Reviews: Full-length reviews should be of 3000-5000 words excluding figures, structures, photographs, schemes, tables etc.
Research Articles: Research articles should be of 3000-6000 words excluding figures, structures, photographs, schemes, tables etc.
Manuscript Preparation:
The manuscript should be written in English in a clear, direct and active style. All pages must be numbered sequentially, facilitating in the reviewing and editing of the manuscript.
Manuscripts should be neatly typed, 1.5 lines-spaced throughout, including tables, on pages of uniform size with at least 2 cm margins on all sides.
Manuscript Sections:
Covering Letter, Title, and Title Page with author affiliations, Abstract, Key Words, Introduction, Materials & Methods, Results, Discussion, Conclusion, Acknowledgements, References, Tables, Figures, Annexure (if any).
Covering Letter- All manuscripts should contain the covering letter Signed by corresponding author.
Manuscript Title Page- Top of paper, Times New Roman; Fonts all caps, bold, 14 points.
Author Names- Last name, followed full first name, corresponding author of the manuscript must be marked with an asterisk and should be listed first, font: bold, 12 points.
Institutional affiliations- Institution/Industry addresses 12 points
E-mail: Email of correspondence authors, 10 points.
Abstract should contain maximum 250 words & 4-6 Keywords.
References
The references should be listed on a separate sheet and should be numbered consecutively in the order in which they are cited in the text. Cite the references in the text by the appropriate number e.g. 1, 2, 3 and the numbers should be in square brackets i.e. [ ]
Examples of references listed in the correct Vancouver style:
Paper Reference:
o Pearson, S.R., Shipway, P.H., Abere, J.O., Hewitt, R.A.A., The effect of temperature on wear and friction of a high strength steel in fretting, Wear, 2013 303:622-631.
Monograph:
o Holmes, R., The Characteristics of Mechanical Engineering Systems, 1st Edition, Pergamon Press, Oxford, New York, 1977.
Book :
o Michael F. Ashby, Materials Selection in Mechanical Design, Fourth Edition, Butterworth-Heinemann, Elsevier, USA, 2011
Chapter in a Book:
o Xin-Jun Liu and Jinsong Wang, Parallel Kinematics - Type, Kinematics, and Optimal Design, Springer Heidelberg New York, 2014, pp. 186-194.
Article in Electronic Form:
o Anchalee Sirikhachornkit, Anongpat Suttangkakul, Supachai Vuttipongchaikij and Piyada Juntawong, De novo transcriptome analysis and gene expression profiling of an oleaginous microalga Scenedesmus acutus TISTR8540 during nitrogen deprivation-induced lipid accumulation, Scientific Reports, volume 8, Article number: 3668 (2018), Available from: URL: https://www.nature.com/articles/s41598-018-22080-8.
Conference Proceedings:
o Himanshu C. Patel, Gunamani Deheri, Harshvadan S. Patel, Shreya M. Mehta (Editors), Proceedings of International Conference on Advances in Tribology and Engineering Systems (ICATES 2013) Gujarat Technological University, Ahmedabad, India, Springer New Delhi, 2013.
Conference Paper:
o Sreenatha Reddy, S and Dhanasekaran R, "Effect of fly ash and basalt on wrought and cast aluminum alloy", International Conference on Advances in Materials and Manufacturing (ICAMM-2016), December 08 - 10, 2016, Osmania University, Hyderabad, India.
Thesis:
o Dhanasekaran R., Studies on industrial three stage planetary gears to enhance durability, Anna University, Chennai, India (2013) pp. 72-151.
Submission Process: Authors are encouraged to submit their articles preferably in electronic form (MS-WORD) by e-mail to- editor.jime@gniindia.org
Review Process: All manuscripts are subject to peer review and are expected to meet standards of academic excellence. If approved by the editor, submissions will be considered by peer-reviewers, whose identities will remain anonymous to the authors.
