International Journal of Applied Engineering Research

Table of Contents

• An approach towards offsetting of object in nonmanifold 3-D geometric modeling

  • Author: Amod Tiwari, A. Chatterjee, A. Pandey, V. Pathak, S.G. Dhande

• A simulation model for cement production

  • Author: S.O. Ogbeide

• Digital down converters for SDR

  • Author: S. Sophia, M. Suganthi

• Mobile robot localization based fusion of ultrasonic sensors and odometers

  • Author: F. Hendel, W. L. Rahal, N. Berrached

• Computation of available transfer capability using neural network

  • Author: K. Narasimha Rao, K. Kiran Kumar, J. Amarnath, S. Kamakshaiah

• Simulation of surge effect in supply chain for demand uncertainty at the end customer

  • Author: B. Chandra Mohana Reddy, K. Hemachandra Reddy, C. Nadha Muni Reddy, K. Vijaya Kumar Reddy, B. Durga Prasad

• Performance analysis of ROI compression algorithms of medical images

  • Author: V.S. Jayanthi, S. Ashwin, A. Shanmugam

• VHDL simulation of direct torque controlled induction motor drive

  • Author: G. Pandian, S. Rama Reddy

• 3-D Finite element models for the prediction of effective transverse thermal conductivity of unidirectional fibre reinforced composites

  • Author: G. Sambasiva Rao, T. Subramanyam, V. Balakrishna Murthy

• Movement pattern of metallic particle in a single phase uncoated gas insulated bus duct with image charge effect

  • Author: K.B. Madhu Sahu, J. Amarnath, K. S. Linga Murthy, B. P. Singh

• RESEARCH ARTICLE

  Finite element analysis of prestressed concrete beams considering realistic cable profile

  • Author: Saleem Akhtar, K.K. Pathak, S.S. Bhadauria, N. Ramakrishnan

• Axisymmetric vibration of piezolaminated-CFRP multilayer solid cylinder

  • Author: E.S. Nehru, A. Dhandapani

• CFD analysis of low speed vertical axis wind turbine with twisted blades

  • Author: Manzoor Hussain M, S Nawazish Mehdi, P. Ram Reddy

• Monotonic and Cyclic Behaviour of Steel 42 CD 4

  • Author: D. Chaouch, A. Sadok, S. Benyebka, A. Chaouch

• Reliable Distortionless Jpeg Image Transmission Over Mimo System Using Antenna Selection

  • Author: R. Deepa, K. Baskaran

• Emissions and performance Curves of Emulsified E-Diesel in DI Engine

  • Author: Venkata Hanumantha Rao, Ram Sudheer Voleti, Venkata Ramesh Chaganti, P. Nageswara Reddy

• On the Performance of Rake Receivers for the UWB System in a Realistic Exponential-Lognormal Model

  • Author: Jyoteesh Malhotra, Ajay K. Sharma, R.S. Kaler

• Process Parameter Optimization and Characterization of Friction Stir Welding of Aluminum Alloys

  • Author: S. Vijayan, R. Raju

• Iterative Wavelet Thresholding for Suppression of Speckle Noise From Magnetic Resonance Images

  • Author: S. Sudha, G.R. Suresh, R. Sukanesh

• RESEARCH ARTICLE

  Feasibility Studies on Solar Photo Degradation of Phenol

  • Author: S. Shanmuga Priya, M. Premalatha, N. Anantharaman

• An Experimental and CFD Investigation of the Effect of Nozzle Inclination and Twisting in a Double Jet Mixed Tank

  • Author: Raja Thiruvengadam, P. Kalaichelvi, N. Ananthraman

• Optimization of Interamplifier Separation in WDM Transmission Systems in The Presence of Fibre Nonlinearities

  • Author: Gurmeet Kaur, M.L. Singh, M.S. Patterh

• A Material Handling Problem for The Utilization of Single Agvs in Machine Modules by Linear Programming Approach

  • Author: V. Sai Srikanth, D. Nageswara Rao

• Optimal Power Flow with FACTS Devices by Exponential Evolutionary Programming Approach

  • Author: Jaya Kumar, Thanush Kodi

• Hydro Magnetic Flows Through A Vertical Wavy Porous Channel with Travelling Thermal Waves

  • Author: R. Muthuraj, S. Srinivas

• Enigma and Growth of Business Incubators in India

  • Author: Nitin Singla, Dinesh Khanduja, Sahib Sartaj Singh

• Security Challenges for Routing Protocol in AD-HOC Networks

  • Author: P.V.S. Srinivas, V. Kamakshi Prasad, C. Raghavendra Rao

• Study of Infrared Focal Plane Array Seekers Against IR-Laser Striking Counter Measure

  • Author: M. Chandrashekar, N. Nagabhushan Raju

• Assessment of FRP Confined RC Columns using Regression Analysis

  • Author: A. Rajasekaran, P. N. Raghunath, K. Suguna

• RESEARCH METHOD

  Influence of Machining Parameters in WEDM for Different Workpiece Thickness

  • Author: C.P.S. Prakash, B.J. Ranganath

• Determination of GPS receiver position using Multivariate Newton-Raphson Technique for over specified cases

  • Author: B. Hari Kumar, K. Chennakesava Reddy, N. Namassivaya

• Evaluation of Inelastic Response of Reinforced Concrete Frames using Pushover Analysis

  • Author: N. Sundar, G. Elangovan

• Studies on the Chloride Permeability of Fly Ash and Silica Fume based Ternary Blended Concrete

  • Author: P. Murthi, V. Sivakumar

• Advanced Land use/Land Cover Classification using High Resolution IRS Imagery for the analysis of Urban Structure

  • Author: Afroz Shaik Mohammed, Shaik Rusthum

• Admissible Set of Robust PID Controller Values Using Hurwitz Criterion for A Pure Integrating Process with Dead Time

  • Author: I. Thirunavukkarasu, V.I. George, S. Narayana Iyer, G. Saravana Kumar, Yousuf Al-Abrii

• Distinction Between Transient and Permanent Faults Using Wavelet Transform

  • Author: M. Sushama, G. Tulasi Ram Das, A. Jaya Laxmi

• Performance of High-Strength Concrete Beams with Hybrid Fibre Reinforcements

  • Author: A. Ravichandran, K. Suguna, P.N. Ragunath, D. Govindarajulu

• Use of hot EGR in a DI Diesel Engine with emulsified Biodiesel as alternate fuel to study the performance and emission characteristics

  • Author: B. Sachuthananthan, K. Jeyachandran

• Comparative Analysis of Hydraulic Drop Ball and Secondary Blasting Technique for Secondary Breaking in Aggregate Quarries. A Case Study of Associated Granite Industry, Igboora, Oyo State, Nigeria

  • Author: M.A. Saliu

• Design and Realization of Soft IP Core for Pulse Oximetery Applications

  • Author: P.K. Gaikwad, S.A. Shinde, R.K. Kamat

• A Hybrid Method of Optimal Capacitor Placement for The Reconfigured Network

  • Author: M. Damodar Reddy, V.C. Veera Reddy

• Design of an Adjustable Roller Chain Coupling for Shafts of Different Diameters

  • Author: Sandeep Singh, Balraj Singh, Harpreet Singh

• Machining Studies of Normal Cryogenic Treated P-40 Tungsten Carbide Cutting Tool Inserts

  • Author: T.V. Sreerama Reddy, T. Sornakumar, M. Venkatarama Reddy, R. Venkatram

• RESEARCH METHOD

  Experimental Investigation on a Centrifugal Compressor by means of squealer tips

  • Author: S. Senthil, N. Krishna Mohan

• RESEARCH ARTICLE

  Rainfall Analysis in Palleru (K-11) Sub-Basin Using GIS

  • Author: M.V.S.S. Giridhar, G.K. Viswanadh

• Hierarchical Perceptual Segmentation using Arbitrary n-phase Levelsets

  • Author: V.M. Sandeep

• Performance Evaluation Model and Decision Support System for Coal Handling System of a Typical Thermal Plant

  • Author: Sorabh Gupta, P.C. Tewari, Avadhesh Kumar Sharma

• A Study on Retrofit of R.C.C Beams

  • Author: M. Asok Kumar, P.A. Krishnan

• A Novel Technique of Controlling DC Power Using Microcontroller Based PWM Controlled Rectifier

  • Author: S.A. Hari Prasad, B.S. Kariyappa, R. Nagaraj, Commander S.K. Thakur

• RESEARCH ARTICLE

  Eco-Friendly Vapor Compression Refrigeration System Simulation Analysis With Double Pipe Evaporator And Condenser

  • Author: K.M. Peethambaran, N. Asok Kumar

• Sequential Hypothesis Testing Method of Anomaly Detection Against Flooding Attack

  • Author: S. Meenakshi, S. K. Srivatsa

• Effect of Particle Velocity, Temperature and Impingent Angle on The Erosive Wear Behavior of Polymer Matrix Composites

  • Author: Y. R. Kharde, K.V. Saisrinadh

• Free Vibration Analysis of a Thick Skew Composite Plate with a Circular Cutout

  • Author: K. Srividya, V. Bala Krishna Murthy, M.R.S. Satyanarayana, G. Sambasiva Rao, K. Mohana Rao

• Investigation of An Oversampled Filter Bank Near Perfect Reconstruction of Input Image

  • Author: S.R. Chougule, R. S. Patil

• Bacterial Concrete - A Self Healing Concrete

  • Author: H.S. Patil, D.B. Raijiwala, Prashant Hingwe, Vijay Bhabhor

• Geopolymer Concrete: A Concrete to be Known More

  • Author: H. S. Patil, D.B. Raijiwala, Prashant Hingwe, Vijay Bhabhor

• Dynamic Characterisation of a Two-Link Flexible Robot Manipulator

  • Author: M. A. Ahmad, Z. Mohamed

• Impact Study on Ferrocement Slabs Reinforced with Polymer Mesh

  • Author: A. Jagannathan

• ANN Controller for Heavy Duty Gas Turbine Plant

  • Author: S. Balamurugan, R. Joseph Xavier, A. Ebenezer Jeyakumar

• Concurrent and Modern Approaches for Designing

  • Author: M. Dosedla

• The Effect of Multiple Access Interference in UMTS

  • Author: Santhi Ch.Rani, Venkata P. Subbaiah, Chennakesava K. Reddy

• RESEARCH ARTICLE

  Indirect Boundary Element Method for the Flow Past a Circular Cylender with Linear Element Approach

  • Author: G. Muhammad, N. A. Shah, M. Mushtaq

• Mechanical Properties and Durability of Rice Husk Ash Concrete

  • Author: V. Ramasamy, S. Biswas

• Studies on Functional Models for Rapid Prototyping

  • Author: M. Sendilkumar, P.S.S. Prasad, K.A. Jagadeesh

• Programmable Speed Controller of AC Servomotor Using FPGA

  • Author: B.S. Kariyappa, S.A. Hariprasad, R. Nagaraj

• RESEARCH ARTICLE

  Electrical Power Distribution Upgrade: Case of Towns in Akwa Ibom State, Nigeria

  • Author: R. Uhunmwangho, E. K. Okedu

• Comparative Study of Thevetia Peruviana Seed Oil with other Biofuels and Diesel as Fuel for CI Engine

  • Author: T. Balusamy, R. Marappan