International Journal of Applied Engineering Research

Table of Contents

• A Novel Approach to Induction Motor Speed Control Using FPGA

  • Author: R. Arulmozhiyal, K. Basakaran

• Tool Wear Behavior in Turning Processes using a Worn cutting Tool

  • Author: L. Rico, S. Noriega, J.J. Aguirre, J.J. Díaz, J. Sánchez

• Role of Machine Flexibility in Lean Manufacturing

  • Author: Gulshan Chauhan, T. P. Singh, S. K. Sharma

• Digital Simulation of High Efficiency Multi Resonant Forward Converter using Simulink

  • Author: L. Padma Suresh, R.S. Rajesh, S.V. Muruga Prasad

• Prediction of Optimal Stability States in Inward- Turning Operation Using Genetic Algorithms

  • Author: K.Rama Kotaiah, J. Srinivas, M. Sekar

• RESEARCH ARTICLE

  Partial Discharge Analysis in High Voltage Rotating Machines Using BPN Algorithm

  • Author: K. Sathiyasekar, K. Thyagarajah, A. Krishnan, A. Ebenezer Jeyakumar

• Optimum Design of Axial Flux Permanent Magnet Slotted TORUS Motor Using Genetic Algorithm

  • Author: S. Asghar Gholamian, S. Hemmati, Reza Nasiri, S. A. Saied, S. Esmaeili Jafarabadi

• CASE STUDY

  Expermental Determination of Indoor Conditions for Human Thermal Comfort in Nigeria a Case Study of Ilorin

  • Author: I.K. Adegun, O.T. Popoola, T. Faniyan

• Highly Directive Patch Antenna Using Planar Metamaterial

  • Author: Monish Gupta, Jyoti Saxena, Anil Vohra

• Design Integration for Nonstandard Flanges for Pressure Vessels

  • Author: Murali Saggarla, Bhaskar Rao Yadavalli

• Nondestructive Measurement of Soluble Solids Content in Pineapple Fruit Using Short Wavelength Near Infrared (SW-NIR) Spectroscopy

  • Author: Diding Suhandy

• Palm Kernel Oil Cake as an Alternative to Earth Resistance-Reducing Agent

  • Author: George Eduful, Joseph Ekow Cole, F.M. Tetteh

• A Novel Semiautogenous Mill Liner Wear Kinetics Model

  • Author: Mohammad Karamoozian, Seyed Ziaedin Shafaei, Reza Kakaie, Mohammad Noaparast, Sedigheh Zeidabadi

• Some Properties of Graphical Partitions

  • Author: Banamali Nath, Bichitra Kalita, Bhaben ch. Kalita

• Influence of Process Parameters and Viscosity on Radial Stresses in Fluid Assisted Deep Drawing Process

  • Author: R. Uday Kumar, P. Ravinder Reddy, A. V. Sita Ramaraju

• Flow Characteristics of Blood in Microchannel

  • Author: Mohd Nadeem Khan, Mohd Islam, M.M. Hasan

• Net Metering Concept: Revolution in Indian Power Scenario

  • Author: Navneet Gupta, R.K. Sharma, Ashish Jasuja

• An Approach to Design, Simulate & Synthesize Frequency Meter Using VLSI TECHNOLOGY

  • Author: Abhay Sharma, Bhupindra Singh Chabra

• Some Aspects of Designing a Dynamic Cellular Manufacturing System for Deterministic and Stochastic Production Requirements

  • Author: V. Jayakumar, R. Raju

• Determination of the Mechanical Properties of Foundry Moulding Sand Bonded with Grade 3 Nigerian Acacia Species Exudates

  • Author: Nuhu A. Ademoh, A.T. Abdullahi

• RESEARCH ARTICLE

  Techno-economic Analysis of a Solar Thermoelectric Power Generator for a Rural Residential House Energy Demand

  • Author: M. Eswaramoorthy, S. Shanmugam

• Design Methodology and Development of Pressure Swirl Atomizer for Micro Gas Turbine Combustion Chamber

  • Author: Digvijay B. Kulshreshtha, Saurabh B. Dikshit, S. A. Channiwala

• A Noval Approch for Characterizatiion of Cardiac Abnormalities Using Sub Band Coding

  • Author: Devendra Kumar Sharma, R. K. Sharma, Suneel Yadav

• Fibre Reinforced Composite (FRC) Structures with Potential Applications: Literature Review

  • Author: Hakim S. Sultan Aljibori

• RESEARCH ARTICLE

  Application of Transient Thermal Analysis for the Assessment of Cooling Potential of Moulding Sands during Casting Solidification

  • Author: Durgesh Joshi, Vivek Bajpai, A.V. Subrahmanyam, B. Ravi

• Effect of Dependent Variables to the Performance of Water Injection Vacuum Drying System

  • Author: Sumpun Chaitep, Payungsak Boonsit, Pipatpong Watanawanyoo

• Effects of Temperature on Tensile Strength of Kevlar Reinforced Composite Materials

  • Author: Sumpun Chaitep, Chaiy Rungsiyakull, Pipatpong Watanawanyoo

• RESEARCH ARTICLE

  Mathematical Analysis, Simulation and Fabrication of Single-Phase High Power Factor AC-DC Buck Converter for Wide Line Voltage Range

  • Author: Mahadev S. Patil, Sanjay P. Patil, Devendra N. Kyatanavar

• Estimation of Optimum Values for the Main Dimensions of A. D.C. Machine by Graphical Method

  • Author: C. Easwarlal, V. Palanisamy, M.Y. Sanavullah

• The Study of Laser Welding Parameters Influence on Fusion Zone Shape and Surface Quality of SUS301L Stainless Steel

  • Author: Wang Hongxiao, Wang Chunsheng, Shi Chunyuan, He Guangzhong, Wang Ting, Xiao Jingfei

• Predictions of the Extent of Renal Artery Stenosis in the Context of Rise in Blood Pressure

  • Author: V.V. Shukla, P. M. Padole, R.L. Sonolikar, Shirish Deshpandeb, H. M. Mardikarc

• Implementation of Lean Manufacturing In Automotive Manufacturing Plant [TEL]

  • Author: M.M. Ravikumar, K. Marimuthu, D. Chandramohan

• RESEARCH METHOD

  Experimental Investigation of Heat Transfer Coefficient of a Refrigerant Mixture in a Fin-And-Tube Evaporator

  • Author: M. Herbert Raj, D. Mohan Lal

• Extrusion Process Design for Non- Circular Rods

  • Author: Vikas S. Pagey, K.K. Pathak, V.K. Sethi

• RESEARCH ARTICLE

  Analysis of Raft with Frame on Two Layered Foundation

  • Author: K. Natarajan, B. Vidivelli

• Porosity and Sorptivity on Performance of Fly Ash Based Geopolymer Mortars in Nitric Acid

  • Author: Suresh Thokchom, Partha Ghosh, Somnath Ghosh

• RESEARCH ARTICLE

  Analytical Analysis of Fluid Flow and Heat Transfer through Microchannels

  • Author: Mohd Nadeem Khan, Mohd Islam, M.M. Hasan

• Setting Up A Comprehensive CFD Model of A Small two Stroke Engine for Simulation

  • Author: Ramamoorthy Hariharan, N V Mahalakshmi, Jeyachandran Krishnamoorthy

• Effect of Exhaust Gas Recirculation Temperature on the Emission and Performance of a Single Cylinder Naturally Aspirated Stationary Diesel Engine

  • Author: Gurumoorthy S Hebbar, Anant Krishna Bhat

• Tool Wear in Cutting of Metal Matrix Composites

  • Author: P. Ravinder Reddy, A.A. Sri Rama Krishna

• Multi-objective Optimization of Parallel Machine Scheduling Using Fuzzy Logic and Simulated Annealing

  • Author: A. Muralidhar, T. Alwarsamy

• RESEARCH ARTICLE

  Experimental Analysis of Oxygen Stripping From Feed Water in a Two Stage Jet cum Tray Type Deaerator

  • Author: K.V. Suryanarayana, K. V. Sharma, P.K. Sarma, V. Dharma Rao, D.M. Reddy Prasad

• New Double Switching Clamping Sequences Based ADPWM Algorithm for Direct Torque Control of Induction Motor Drives

  • Author: K. Sri Gowri, T. Brahmanada Reddy, Ch. Sai Babu

• Effect of Piston Bowl geometry on Flow, Combustion and Emission in DI Diesel Engine - A CFD approach

  • Author: A. Gunabalan, R. Ramaprabhu

• RESEARCH ARTICLE

  Finite Element Analysis of the Effect of Cutting Speeds on the Orthogonal Machining Process of AA 6082 (T6) Alloy

  • Author: K.S. Vijay Sekar, M. Pradeep Kumar

• Optimal Solution for 2-D Rectangle Packing Problem

  • Author: Kawaljeet Singh, Leena Jain

• A Study on Effects of Water Capacity on the Performance of a Simple Solar Still

  • Author: T.V. Arjunan, H.S. Aybar, N. Nedunchezhian

• Digital Simulation of Dynamic Voltage Restorer (DVR) for Voltage Sag Mitigation

  • Author: Chintapudi Sasikala, Vyza China Veera Reddy, Vyza Usha Reddy

• Effects of Key Parameters on the Seismic Design of Reinforced Concrete Framed Joints

  • Author: Yogesh D. Patil, H.S. Patil, M.N.K.A. Raju

• Intelligent Traveling Agent System for Air Lines Reservation

  • Author: Arvind Dewangan, Rajiv Kumar, Vinod Kumar, Maninder Singh

• Using FACTS Devices and Energy Storage Systems for Voltage Flicker Mitigation in Electric Arc Furnaces

  • Author: Shady A. El-Kashlan, Hussien El-Desouki Saied

• Comparison of Performance and Combustion Parameters and Emissions on a Variable Compression Ratio Diesel Engine Fueled with CsME

  • Author: V. Rambabu, V.J.J. Prasad, T. Subramanyam, B. Satyanarayana

• Power Quality Improvement by Suppressing Harmonics using Power Active Filters

  • Author: Sardar Ali, P. Sujatha, Anjaneyulu

• RESEARCH ARTICLE

  Functional Failure Analysis of A Pandrol Clip

  • Author: C.L.V.R.S.V. Prasad, S. Srikiran

• Integrated Inventory System with the Effect of Inflation and Credit Period

  • Author: Rakesh Agrawal, Debangana Rajput, N.K. Varshney

• Particulate Suspension Flow Induced by Peristaltic Waves in a Non-Uniform Channel

  • Author: Amit Medhavi, U. K. Singh

• Tensile Strength of Elephant Grass Fiber Reinforced Polypropylene Composites

  • Author: N. Ravi Kumar, K. Ramji, A. V. Ratna Prasad, K. Murali Mohan Rao

• RESEARCH ARTICLE

  X-Ray Diffraction Analysis on the Effect of Silica Fume and Water in Blended Cement Paste

  • Author: P. Veluchamy, S. Barathan, G. Sivakumar, N. Anandhan

• Effect of Sheet Thickness on FLD for AISI – 1008 (HR Grade)

  • Author: R. Patel Ramsing, H.K. Raval

• Characterization and Electroluminescence of ZnS Nanocrystals

  • Author: Srinivas Mantha, S. Vathsal

• Emission Characteristics of High Current Density Thermionic Hollow Cathodes

  • Author: Ved Prakash, Dubey, Mahavir Singh Tyagi, Anil Vohra, Harish Kumar Dwivedi

• Reduction of Multivariable Interval Systems using Simplified Polynomial Derivative Technique

  • Author: G.V.K.R. Sastry, G. Raja Rao

• Linear Uncertain Systems Reduction Using IRAM

  • Author: G.V.K.R. Sastry, D. Vijay Kumar

• Enhancement of Camera Captured Images Using Modified Bacterial Foraging

  • Author: Sunil Kumar, Rashmi Gupta, Rajiv Kapoor, Asok Bhattacharyya

• Simultaneous Optimization of Design Tolerance and Total Cost for a Piston and Cylinder Assembly

  • Author: R. Sampath Kumar, N. Alagumurthi, R. Ramesh

• Resistance of Standard Grade Self Compacting Concrete and Normal Concrete to Acid Attack

  • Author: S. Venkateswara Rao, M.V. Seshagiri Rao, P. Rathish Kumar

• Modeling Deep Drawing of Cylinderical Cup

  • Author: Najmeddin Arab, Ernest Nazaryan

• Matlab Based Resonant Inverter Fed Induction Heating

  • Author: S. Arumugam, S. Ramareddy

• RESEARCH ARTICLE

  Exery Analysis of Vapour Compression Refrigeration System

  • Author: T. Hari Prasad, K. Poli Reddy, D. Raghu Rami Reddy

• Performance Analysis of Certain Scalar Wavelets on Mammogram Image Compression

  • Author: U.S. Ragupathy, A. Tamilarasi

• Service Quality and Passenger Satisfaction: An Empirical Investigation of Indian Airline Services

  • Author: S. Balasubramanian, J. Joseph Francis

• RESEARCH METHOD

  Experimental Investigation of Natural Convection Heat Transfer from an Array of Protruding Heat Sources in A Square Enclosure

  • Author: S. Venkatachalapathy, M. Udayakumar

• Preparation and Magnetic Properties of Ni-Zn Magnetic Fluid

  • Author: K. Velmurugan, V.S.K. Venkatachalapathy, S. Sendhilnathan

• Effect of Geometry on the Performance of Annular Diffuser

  • Author: B. B. Arora, B. D. Pathak

• Conventional and Corrected Performance-Rating Parameters of Direct Evaporative Air Coolers

  • Author: R.K. Kulkarni, S.P.S. Rajput

• Suppression of Diffusion Flame in Cup Burner Apparatus

  • Author: Suresh Lal, J.C. Kapoor, A. Kushari, S. Maji

• A New Criterion for the Prediction of Fatigue Strength of Engineering Materials Against Multiaxial Fatigue Loading

  • Author: K. Annamalai, M. Adithan

• Modeling of Creep and Stress Relaxation Behaviour of an Articular Carilage by Finite Element Method

  • Author: CH. Srinivasa Rao, C. Eswara Reddy

• Quintic B-Spline Solutions of the Laminar Boundary Layer on a Moving Continuous Flat Surface with Magnetic Field

  • Author: D.C. Joshi